اخبار القسم en
The Department of Chemical Engineering discusses a master's thesis on the manufacture of a front osmosis membrane of PVC-PA for direct fertilization applications.
Written by zaid kareemThe Department of Chemical Engineering discusses a master's thesis on the manufacture of a front osmosis membrane of PVC-PA for direct fertilization applications.
The Department of Chemical Engineering at the University of Technology discussed the master's thesis tagged.
Fabrication of PVC-PA thin film forward osmosis membrane for direct fertigation applications
The student Bakr Mohamed Ibrahim's thesis aimed to fabricate composite thin films and evaluate them in the FO process for direct composting applications. PVC films with porous top surface structure were prepared in different concentrations by phase inversion process. While the PA thin film was prepared on the top porous surface of PVC substrate using interfacial polymerization reaction with different concentrations and reaction times to improve the performance of FO. A comprehensive characterization of the membranes was also carried out. The results showed that the water flow of the composite thin films improved with the reduction of the amount of PVC. It also showed an improvement in water flow while reducing the concentration and reaction time of the PA layer. Also, the effect of several variables on membrane performance was studied, including membrane orientation, flow rate, draw solution concentration, and feed solution concentration. It has been demonstrated that using a membrane with a porous superstructure surface as a substrate is a reasonable strategy for preparing a high-performance FO membrane.
And the discussion committee consisted of Prof. Dr. Asawer Abdul Rasool Kweri, Chairman. And the membership of Assist. Prof. Dr. Harith Nouri Muhammad and Assist. Prof. Dr. Kazem Matar Shabib. And under the supervision of Prof. Dr. Qusay Fadel Abdel Hamid and Dr. Saif Ali Nuri. As well as scientifically evaluating the thesis by Prof. Dr. Raheeq Ismail Ibrahim from the University of Technology / Department of Electromechanical Engineering and Assist. Prof. Dr. Sama Muhammad Abdullah from the University of Baghdad / College of Engineering / Department of Chemical Engineering. and linguistically by Dr. Farooq Ahmed Mehdi from the University of Technology, and the thesis was accepted with appreciation (excellence).
The Department of Chemical Engineering organizes a symposium on environmental pollution and community health.
Written by zaid kareem
The Department of Chemical Engineering organizes a symposium on environmental pollution and community health.
The Department of Chemical Engineering at the University of Technology organized a symposium entitled Environmental Pollution and its Impact on Community Health. On Sunday 5/14/2023.
The symposium included a lecture by the expert, Mr. Zaidoun Khalaf Al-Saadi from the Oil Research and Development Center, entitled Studies of reducing the environmental impact in the work sites of licensing rounds with the Malaysian lokoil.Bashnef companies and the Russian petronas. The symposium also included a lecture by Dr. Ramez Mahdi Jawad from the Middle Refineries Company, entitled Modern Models Used in the Study of Pollutants Emitted from Oil Refineries. In it, he discussed the importance of environmental studies and preparing reports on project sites and their impact on establishing projects through determining the environmental impact. In addition, a number of students of the Environmental Pollution Branch presented a technical activity on the reality of environmental pollution. The symposium concluded with the distribution of certificates of appreciation by the Head of the Chemical Engineering Department, Prof. Dr. Jamal Manea Al-Rubaie, to the participants.
The Department of Chemical Engineering organizes a symposium on the importance of modern oil refineries and their economic role
Written by zaid kareemThe Department of Chemical Engineering organizes a symposium on the importance of modern oil refineries and their economic role
The Department of Chemical Engineering at the University of Technology organized a scientific symposium entitled the importance of modern oil refineries and their role in developing the economy on Wednesday, 3/5/2023.
The symposium aimed to introduce modern oil refineries and present the Karbala refinery experience and its pioneering role in supporting the national economy. The seminar included scientific lectures by Eng. Muhammad Fazaa from the Ministry of Oil / Director of Karbala Refinery, and Eng. Sattar Jalil Hassan from the Oil Research and Development Center at the Ministry of Oil. A detailed presentation was given during the seminar on the importance of expanding the establishment of modern oil refineries, as they are of great economic feasibility and have great importance in developing oil production and acquiring foreign expertise and skills in the Iraqi refinery industry.
The Department of Chemical Engineering organizes a student visit to the Center for Nanotechnology and Advanced Materials.
Written by zaid kareemThe Department of Chemical Engineering organizes a student visit to the Center for Nanotechnology and Advanced Materials.
The Department of Chemical Engineering at the University of Technology organized a student visit to the Nanotechnology and Advanced Materials Center on Wednesday, 3/5/2023, with the participation of students of the Chemical Engineering and Oil Pollution Engineering Branch / third stage. The visit aimed to enhance the scientific and applied aspects of the students, during which the students were briefed on the analysis and measurement devices in the center's laboratories to benefit from them in environmental measurements, as well as viewing water treatment projects. The committee supervising the visit consisted of:
Asst. Prof. Dr. Alyaa Khadier Mageed
Lect. Alyaa Essam Mahdi
Asst. Lect. Khitam Salem Shaker
Asst. Lect. Maryam Tariq Hassan
Asst. Lect. Zeina Abdul Karim Gharib
The Department of Chemical Engineering organizes a graduation projects competition for the fourth stage, chemical process engineering branch, for the year 2022-2023.
Written by zaid kareemThe Department of Chemical Engineering organizes a graduation projects competition for the fourth stage, chemical process engineering branch, for the year 2022-2023.
The Department of Chemical Engineering at the University of Technology organized a graduation projects competition for the fourth stage, Chemical Process Engineering Branch, on Thursday, 4-5-2023. In the presence of the Head of the Chemical Engineering Department, Prof. Dr. Jamal Manee Ali Al-Rubaye, and the supervision of the Head of the Chemical Process Engineering Branch, Prof. Dr. Asawer Abdul Rasool Kwae, and the Arbitrators Committee, as well as representatives of Al Baraka Industrial Investments Company. The students participating in the competition presented their projects.
According to the results of the evaluations of the Arbitrators Committee, the student Arkan Muwafaq and the student Zainab Abdel Salam won the first place for their project (Production of glycerol) under the supervision of Dr. Abbas Jawad. As for the second place, it went to the students Ahmed Jaber and Haider Akram for their project (Production of Salicylic Acid) under the supervision of Dr. Abbas Jawad as well. Student Abdullah Bassel won the third place for his project (Production of nitrobenzene) under the supervision of Lect. Bashar Jawad, and equally with students Muqtada Ahmed and Amna Sami, who also won third place for their project (Reuse of carbon dioxide from natural gas by using chemical processes) under the supervision of Prof. Dr. Thamer Jassim and Asst. Lect. Maryam Tariq
The Department of Chemical Engineering organizes a scientific symposium on the pharmaceutical industry in Iraq
Written by zaid kareemThe Department of Chemical Engineering organizes a scientific symposium on the pharmaceutical industry in Iraq
The Department of Chemical Engineering at the University of Technology organized a scientific symposium entitled The Pharmaceutical Industry in Iraq: Reality and Ambition. On Tuesday, 9/5/2023.
The symposium included scientific lectures by Dr. Abd al-Rahman Abbas Tohme, General Manager of the Pharmaceutical Industry Company in Samarra, and Dr. Ali Jabbar, Sales Director of Pioneer Pharmaceutical Industries, during which they learned about the reality of the pharmaceutical industry in Iraq, its future prospects and ways to develop it. It also included a detailed presentation on the role of the private sector in the pharmaceutical industry, as well as the role of the Chemical Engineering Department in the pharmaceutical industry. The symposium concluded with the distribution of certificates of appreciation to the lecturers.
The Department of Chemical Engineering is discussing a master's thesis on carbon dioxide absorption by eutectic solvents.
Written by zaid kareemThe Department of Chemical Engineering is discussing a master's thesis on carbon dioxide absorption by eutectic solvents.
The Department of Chemical Engineering at the University of Technology discussed the master's thesis tagged.
Absorption of carbon dioxide by a deep eutectic solvent
The student Muhammad Nouri Jassim's thesis aimed at studying the reduction of carbon dioxide emissions into the atmosphere, as this leads to higher temperatures, increased pollution and health problems.
In this work, three types of eutectic solvents were used, such as 1-choline chloride-2-urea, 1-choline chloride-3-phenol and 1-choline chloride-6-monoethanolamine at a concentration of (0-3) mol/L. The ionic liquid is mixed with canolamin such as MEA at a concentration of (4mol/L) and water to increase the adsorption efficiency.
The compound central design (CCD) method was applied to reduce the number of trials needed to optimize the operating conditions. In the adsorption experiments, the effect of the solution temperature (25-45) C, the solvent concentration (0-3) mol/L and the adsorption time (60-150 minutes) were studied to determine the optimal operating conditions on the performance of the adsorption process.
Experimental data showed that the best solvent for capturing carbon dioxide is 1-choline chloride 2-urea under operating conditions with a temperature of 35 °C, a concentration of 1.5 mol/L of solvent, and 105 minutes of adsorption time. Optimal operating conditions for CO capture were achieved according to the following specifications: CO2 concentration output 1.258%, adsorption rate 0.078 mol/kg min, CO2 loading 7.977 mol CO2/kg, adsorption capacity 0.350 kg CO2/kg solvent, The solubility was 0.068 mol / mol and the adsorption efficiency was 92% for the solution. In this research, the reaction kinetics of carbon dioxide for the best solvent was the reaction rate constant (0.38) min -1, and the forward reaction was
(k1 = 0.0447) L/mol/min and the back reaction was (k2) = 6.2×10-4 L 3/mol 2. The order of the reaction was first order and the mass transfer coefficient was (0.1443) mol/bar/l min.
And the discussion committee consisted of Prof. Dr. Khaled Ajami Sukkar Abdul-Rubaie Chairman. And the membership of Prof. Dr. Naseer Abboud Issa and Dr. Haider Abdul Karim Mohsen. And under the supervision of Prof. Dr. Thamer Jassim Muhammad and Prof. Dr. Abdel Moneim Abbas Karim. In addition to evaluating the thesis scientifically by Prof. Dr. Asrar Abdullah Mohsen from the University of Baghdad / College of Engineering / Department of Chemical Engineering and Prof. Dr. Sabri Saihoud Hamid from the University of Technology. and linguistically by Dr. Farooq Ahmed Mehdi from the University of Technology. The thesis was accepted with appreciation (Excellence).
The Department of Chemical Engineering initiates the distribution of the Ramadan basket to the students of the internal departments.
Written by zaid kareemThe Department of Chemical Engineering initiates the distribution of the Ramadan basket to the students of the internal departments.
On the occasion of the holy month of Ramadan and under the direct supervision of the Head of the Chemical Engineering Department at the University of Technology, Prof. Dr. Jamal Manea Al-Rubaie. The Department of Chemical Engineering took the initiative to distribute the Ramadan basket to the students of the department in the internal departments on Tuesday, 4/11/2023.
The initiative included the distribution of (60) food baskets, 25 baskets for female students and 35 baskets for male students residing in the dormitory departments. In this regard, Prof. Dr. Jamal Al-Rubaie confirmed that the distribution of Ramadan baskets on this day represents an extension of the department’s directions to contribute to creating psychological conditions and helping students to continue performing the obligation of fasting. By covering some of their food needs. As well as deepening the bonds of social relations and spreading a culture of cooperation and a sense of responsibility towards the students of the department.
The Chemical Engineering Department organizes a workshop on how to prepare the Instructor Portfolio.
Written by zaid kareemThe Chemical Engineering Department organizes a workshop on how to prepare the Instructor Portfolio.
The Department of Chemical Engineering at the University of Technology organized a workshop on how to prepare the Instructor Portfolio on Sunday 26/3/2023. The workshop aimed to introduce how to prepare the Instructor Portfolio according to the Iraqi engineering program accreditation standards. The workshop was managed by Prof. Dr. Adnan AbdulJabbar AbdulRazak and Prof. Dr. Asawer Abdulrasool Kwae. The workshop included a scientific lecture by Asst. Prof. Dr. Farah Talib Jasim, during which she gave a detailed explanation of how to prepare the Instructor Portfolio in accordance with Iraqi engineering program accreditation standards, and its importance in obtaining the programmatic accreditation for the Chemical Engineering Department.
Within the scientific activities of the Department of Chemical Engineering, the Chemical Engineering Department discusses a M.Sc. Dissertation entitled (Enhance the anti-fouling of flat sheet Polyphenylsulfone membranes incorporating graphene oxide f
Written by zaid kareemWithin the scientific activities of the Department of Chemical Engineering, the Chemical Engineering Department discusses a M.Sc. Dissertation entitled (Enhance the anti-fouling of flat sheet Polyphenylsulfone membranes incorporating graphene oxide for ultrafiltration applications). The M.Sc. Dissertation for the student Raghad Mahmoud Sawadi Muhammad included:
The discussion committee consisted of Prof. Dr. Khalid Turki Rashid, chairman, Asst. Prof. Dr. Hussein Majeed Fleih, member, Lect. Dr. Haiyam Mohammed Abdalraheem, member, and under the supervision of both Prof. Dr. Qusay Fadhel Alsalhy and Asst. Prof. Dr. Sama Mohammed Abdullah. As well as the scientific evaluation of the dissertation was done by Prof. Dr. Shahla Ismail Ibrahim, University of Baghdad, College of Engineering, Department of Environmental Engineering and Asst. Prof. Dr. Yusor Riyad Abdel Majeed from Al-Nahrain University/ College of Engineering/ Chemical Engineering Department, and linguistically by Lect. Dr. Farooq Ahmed Mehdi from the University of Technology.
More...
Within the scientific activities of the Department of Chemical Engineering, the Chemical Engineering Department discusses a M.Sc. Dissertation entitled (Green Synthesis of Nano Catalysts Using Plant Extracts for Removing the Organic Pollutants in wat
Written by zaid kareemWithin the scientific activities of the Department of Chemical Engineering, the Chemical Engineering Department discusses a M.Sc. Dissertation entitled (Green Synthesis of Nano Catalysts Using Plant Extracts for Removing the Organic Pollutants in water). The M.Sc. Dissertation for the student Shahnaz Bassm Khazal included:
The discussion committee consisted of Prof. Dr. Zaidoon Mohsin Shakor Al-Obaidi, chairman, Asst. Prof. Dr. may ali muslim alsaffar, member, Asst. Prof. Dr. Ali Raad Mohammed Al-Shathr, member, and under the supervision of both Prof. Dr. Adnan AbdulJabbar AbdulRazak and Asst. Prof. Dr. Alyaa khadhier mageed. As well as the scientific evaluation of the dissertation was done by Asst. Prof. Dr. Basma Ismail Hussein from the University of Baghdad and Asst. Prof. Dr. Osama Akram Saeed from Al-Nahrain University, and linguistically by Lect. Dr. Laith Salim Sabri from the University of Technology.
Within the scientific activities of the Department of Chemical Engineering, the Chemical Engineering Department discusses a M.Sc. Dissertation entitled (Ultrafiltration Polymeric Membrane for Purification of Crude Vegetable Oil)
Written by zaid kareemWithin the scientific activities of the Department of Chemical Engineering, the Chemical Engineering Department discusses a M.Sc. Dissertation entitled (Ultrafiltration Polymeric Membrane for Purification of Crude Vegetable Oil), On Monday, 20/3/2023. The M.Sc. Dissertation for the student Janan Muhammad Shehab included:
The discussion committee consisted of Prof. Dr. Adnan AbdulJabbar AbdulRazak, chairman, Asst. Prof. Dr. Abdul Hakim Dahham Hussein, member, Lect. Dr. Farooq Ahmed Mehdi, member, and under the supervision of both Prof. Dr. Khalid Turki Rashid Al-Jewari and Lect. Dr. Manal Afham Toma. As well as the scientific evaluation of the dissertation was done by Prof. Dr. Iyad Abdel-Hamza Faisal from the University of Baghdad and Prof. Dr. Ali Hussein Abbar from the University of Technology.
A Professor from the Department of Chemical Engineering participates in the discussion of a master's thesis at Al-Nahrain University.
Written by zaid kareemA Professor from the Department of Chemical Engineering participates in the discussion of a master's thesis at Al-Nahrain University.
As part of the external activities of the Department of Chemical Engineering at the University of Technology, Prof. Dr. Khaled Hamid Rashid participated in the discussion committee for the master's thesis of the student Maha Hussein Kazem, who was tagged.
Experimental investigation on steels corrosion in dilute and concentrated acid under flow conditions.
In the Faculty of Engineering, Al-Nahrain University, on Thursday, 3/16/2023.
The Chemical Engineering Department organizes a summer training workshop.
Written by zaid kareem
The Chemical Engineering Department organizes a summer training workshop.
The Department of Chemical Engineering at the University of Technology organized a workshop entitled Summer Training and Developing Scientific Skills for Students. On Thursday, 3/15/2023. With the participation of students of the second and third stages of the morning and evening studies.
The workshop aimed to introduce the importance of summer training to the students included in the academic year 2022/2023. Clarification of summer training instructions and timetables according to the university calendar, and the necessity of adhering to the specified timings and not exceeding them, and urging students covered by summer training to make maximum use of summer training to develop their scientific capabilities.
The workshop was managed by Prof. Dr. Khaled Hamid Rasheed, Prof. Dr. Bushra Abdullah Majeet, Director of the Summer Training Unit, Dr. Walaa Abdel-Hadi, and Eng. Oldest Donia Jani Qali, and Chief Engineer and Senator Sami Abbas.
