اخبار القسم en
A faculty member in the Department of Chemical Engineering published research in an international journalWritten by عضو ارتباط
More recently, Dr.Abbas J. Sultan has published his study in the International Journal of Multiphase Flow titled " Impact of heat exchanging internals configurations on the gas holdup and bubble properties in a bubble column." This international journal has an impact factor of 2.83 under Elsevier publisher.
A faculty member in the Department of Chemical Engineering published research in an international journalWritten by عضو ارتباط
Recently, Dr.Abbas J. Sultan has published his study in Fuel Journal titled " Influence of heat-exchanging tubes diameter on the gas holdup and bubble dynamics in a bubble column. " This international journal has an impact factor of 5.13 under Elsevier publisher.
Lecture within the activities of scientific and cultural activityWritten by عضو ارتباط
Within the scientific and cultural activities for the first semester of the Department of Chemical Engineering for the academic year 2019-2020, a master’s student, a lecture was given by Kholoud Salem Dawood entitled:
Preparation of composite-modified Iraq clays for the hydro desulfurization of heavy fuels
And that was in the presence of the Head of the Chemical Engineering Department, Assist. Prof. Dr. Jamal Manea Al-Rubaie, Distinguished Greeters, Branch Heads, and a number of teaching staff, employers, and master’s students in Al-Khwarizmi Hall on Thursday, January ninth, 2020.
The oil refining industry has considerably grown during the 20th century to become an important part of everyday modern activity. One of the main objectives of heavy fuels processing is to reduce their very high sulfur ratio. This project aims to prepare and characterize different types of catalysts using kaolin Iraq's clay (metakaolin materials with big pores from natural clays of Iraq).
Metakaolin was introduced into alumina as a composite support for hydrodesulfurization process and use series of the active metal (e.g. nickel, iron, cobalt, silver, copper and molybdenum). The catalyst was prepared by the incipient wetness impregnation (IWI) method and characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, pore volume and BET surface area. Their hydrodesulfurization (HDS) activity for heavy fuels (gas oil) were evaluated and compared in different parameters (temperature, pressure etc.) by a fixed bed reactor while kinetics of the HDS reaction was studied using the different catalysts separately. Apply this process through a mathematical model.
Opening the scientific cooperation between the Chemical Engineering Department and the Ministry of DefenseWritten by عضو ارتباط
Mr. Head of the Department of Chemical Engineering, Assist. Prof. Jamal Manea Ali Al-Rubaie, met a delegation from the Ministry of Defense represented by Dean Dr. Muhammad Abdul Rahman, director of research and development at the Planning Directorate and engineer dean Nazem Jihad from the Directorate of Electrical Mechanical Engineering and the meeting was attended by Prof. Dr. Khaled Ajami Sukkar. During the meeting, matters of scientific communication were discussed between the Chemical Engineering Department and the Ministry of Defense. The head of the department accompanied the delegation to meet the President of the University, Prof. Dr. Ahmed Mohamed Hassan Al-Ghabban on Sunday January 5th, 2020. The visit included opening up scientific cooperation between the two parties in topics that serve the community because with what has been distinguished by the Technological University of the laboratories of scientific expertise and advanced in all disciplines, especially in the field of nanotechnology.
Within the activities of the scientific activity, the Department of Chemical Engineering held a seminar by a doctoral student, Omar SabahWritten by عضو ارتباط
Entitled: Computational and experimental study of hydrodynamic and heat Transfer for the binary mix of solid particles in a three-phase fluid bed reactor
The hydrodynamic characteristics and heat behavior were investigated in a co-current gas-liquid-solid fluidized bed containing a binary mixture of particles. A three-phase (gas-liquid-solid) fluidized bed was used to study the hydrodynamic characteristics (pressure drop, phase hold up, minimum fluidization velocity, bed expansion and rise bubble velocity) of the particle (glass beads) with different diameters (4,5,6,8, and10) mm using water as liquid phase and air as the gas phase. The experiments were carried out in a 0.115m ID, a 2 m-height vertical Perspex column. The column consisted of three sections (gas–liquid separation, test and gas–liquid distributor). Heat transfer characteristics in three-phase fluidized beds for an immersed vertical cylindrical heater were studied at steady state conditions. Determining experimentally the heat coefficient in Gas-liquid-solid fluidized-beds and studying the influence of some variables, such as particle size, heat flux, heater position and fluidizing velocity. Then Theoretical analysis and CFD simulation of a fluidized bed reactor for prediction of hydrodynamic properties and heat transfer parameters.
Within the activities of the scientific activity, the Department of Chemical Engineering held a seminar by the Ph.D. student, Areej DelphWritten by عضو ارتباط
Within the activities of the scientific and cultural activities for the first semester of the Chemical Engineering Department for the academic year 2019-2020, PhD student Areej Delph gave a lecture entitled:
Evaluation of the impact of nanoparticle additives on the performance of multi-phase flow systems in the oil and gas sector
And that is on Ibn Al-Rushd Hall, where the Head of the Department of Chemical Engineering, Prof. Dr. Jamal Manea Ali, associate masters, branch heads, and a number of teaching staff, employees, and masters students, on Thursday, 2/1/2020, the research aims to study the effect of nanotechnology additives on the flow of crude oil and its rheological properties in multi-stage systems in the oil industry in order to reduce pressure drop in pipelines Transporting crude oil, which increases productivity and reduces pumps ’energy consumption, thereby reducing pumping costs
The Department of Chemical Engineering Welcomed Professor Dr. Muhammad Hillil, President of the University of Oil and Gas in Basra Governorate.Written by عضو ارتباط
Chemical Engineering Department / University of Technology welcomed Professor Dr. Muhammad Hillil, President of the Oil and Gas University in Basra Governorate, on Wednesday, January 8th, 2020. He was welcomed by Mr. Head of the Chemical Engineering Department Assist. Prof. Dr. Jamal Manea Al-Rubaie, the scientific assistant, Prof. Dr. Adnan Abdul-Jabbar and Assist. Prof. Dr. Khaled Ajami Sukkar the Chairman of the Department and blessed his visit to the department. During the visit, a discussion was made on the mechanism of cooperation that will be signed between the University of Technology and the University of Oil and Gas.
The Division of Quality Assurance and Performance Evaluation in the Department of Chemical Engineering held a training workshop entitled (an improvement plan according to the axes of the national classification form for the academic year 2018/2019)Written by عضو ارتباط
Within the activities of the Department of Chemical Engineering for the first semester of the academic year 2019/2020, the Division of Quality and Performance Evaluation in the Department of Chemical Engineering held a workshop entitled “Plan for improvement according to the axes of the National Classification Form for the academic year 2018/2019” in Dar Al Salam Hall on Wednesday, January 8th, 2020. The workshop was attended by the Head of the Department of Chemical Engineering Prof. Jamal Manea Al-Rubaie, Heads of Branches, and an elite of the department’s professors and employers while a lecture was delivered by the Director of the Quality Assurance and Performance Evaluation Division Lecturer Dr. May Muslim, and the workshop included three axes, namely (scientific research), (quality improvement and programmatic accreditation) and (scientific activities).
The volunteer work team from the Department of Chemical Engineering / University of Technology visited the Mother Teresa House for severely handicapped childrenWritten by عضو ارتباط
The volunteer team in the Chemical Engineering Department, which includes an elite group of teachers and students visited Mother Teresa's home for severely handicapped children in Al-Karrada / Baghdad on Thursday, January 16th, 2020. The head of the department, Prof. Dr. Jamal Manea Al-Rubaie met members of the team, blessed them for this beautiful initiative and called to increase humanitarian initiatives in this field. The team gave joy to the children and showed them love and affection
The Department of Chemical Engineering held a lecture in a closed-circuit television session in cooperation with the Faculty of Engineering / Alexandria University / Arab Republic of EgyptWritten by عضو ارتباط
In scientific coordination and cooperation between the University of Technology / Department of Chemical Engineering and University of Alexandria / Faculty of Engineering in the Arab Republic of Egypt, the lecture was delivered by Dr. Mahmoud Taha Muharram at the University of Alexandria entitled: -
(Energy status and concerns)
Within the television contact, the head of the Department of Chemical Engineering, Prof. Dr. Jamal Manea Al-Rubaie, and a group of professors and employers of the department and university were attended the lecture in Dar Al Salam Hall on Thursday January 13th, 2020.
The Department of Chemical Engineering held a workshop titled (CBRN material hazards) in cooperation with the office of the scientific assistant / division to control the circulation of hazardous and toxic chemical, biological, and radiological materWritten by عضو ارتباط
The Department of Chemical Engineering held a workshop titled (CBRN), in cooperation with the office of the scientific assistant / division for control of handling of hazardous chemical, biological, and radiological materials and the CBRN university committee, where the President of the University of Technology, Prof. Dr. Ahmed Mohammed Hussein al-Ghabban and head of the Department of Chemical Engineering Assist. Prof. Dr. Jamal Manea al-Rubaie and Lecturer Hashem Sharif Nima, head of the CBRN circulation control division, a group of faculty members, and employers of the department and university attended in Dar Al Salam Hall on Monday January 13th, 2020. The scientific session was chaired by Assist. Prof. Dr. Khaled Ajami Sukkar and the chemical session, by session moderator Israa Attia Ajil, where lectures were given by each of Prof. Abdel Nasser Mohamed Abdullah from the Department of Applied Sciences and Lecturer Dr. Manal Afham Thomas from the Department of Chemical Engineering and Lecturer Hashem Sharif Neama, official of the CBRN Handling Control Division, and Dr. Saleh Abdulreda Al-Bakri from the Environmental Research Center. The workshop aimed to raise awareness of the risks of CBRN materials, the importance of prevention and protection, and define the role of the CBRN circulation control division and raise the level of laboratories, researchers and postgraduate, and primary students dealing with dangerous and toxic materials in general. At the end of the workshop, certificates of appreciation were distributed to members of the supervising committee and lecturers.
Head of the Chemical Process Engineering Branch Prof. Dr. Riyadh Sadiq met with members of the experimental laboratory staff.Written by عضو ارتباط
Head of the Chemical Process Engineering Branch Prof. Dr. Riyadh Sadiq met with members of the experimental laboratory staff in Ibn Al-Rushd Hall on Sunday, January 26th, 2020. The head of the branch, Prof. Dr. Riad Sadiq mentioned to maintain the devices of laboratory experiments and provision of materials in addition to taking precautions for the risks of chemicals and how to deal with them.
Head of the Chemical Engineering Department, Assist. Prof .Dr. Jamal Manea Ali Al-Rubaie visited the final course of the first semester exams for postgraduate studentsWritten by عضو ارتباط
The head of the Chemical Engineering Department, Assist. Prof. Dr. Jamal Manea Ali Al-Rubaie visited the final course of the first semester exams for postgraduate students in the classroom, which took place on Monday, January 27th, 2020 where he continued to provide all the requirements of the examination halls, assured the students to adhere to the exam instructions and wished them success and approval.
The Department of Chemical Engineering held a training workshop on the AutoCAD drawing programWritten by عضو ارتباط
The Department of Chemical Engineering held a training workshop on the AutoCAD program to achieve the accreditation of educational laboratories GLP for staff and employers of the department, on Monday, 20/1/2020, in the programming laboratory where the lecture was given by Lecturer Ghaida Saeed.